User's Manual

14
4. Select your Time Zone.
5 .Enable or disable Daylight Savings.
6. Review the LAN IP Address information and change it if necessary. These fields show the
Device IP Address and Subnet Mask as seen by others on your Local Area Network (LAN).
Most users will not need to change these values.
If your ISP uses PPPoE, choose Enable and go on to Step 8; otherwise, choose Disable and skip
to Step 7.
7. For WAN IP Address (also called the Public IP), choose either Obtain an IP Address
Automatically (most users) or Specify an IP Address (if your ISP assigns static IPs). If you
choose the second option, type in the Wide Area Network (WAN) IP Address, Subnet Mask,
ISP Gateway Address, and DNS information. Your ISP should provide these values.
8. Select your Point-to-Point Protocol over Ethernet (PPPoE) settings. PPPoE allows your ISP to
authenticate your connection by requiring you to submit a username and password.
9. Type in the PPPoE User Name and Password provided by your ISP.
10. Click Apply when you finish choosing your settings, or click Cancel to undo your changes.