User's Manual

34
˙ Virtual Server
Use the Virtual Servers screen to provide remote services, such as FTP or Telnet, from computers
in your network. The Virtual Servers screen is shown in the figure below.
To set up a computer on your network as a Virtual Server:
1. Enter the name you wish to give each application in Service field..
2. Select a Public IP Address from the drop-down list.
3. Specify a Service Port. For help on which port to choose, refer to the Well-known Ports table on
the right-hand side of the screen:
4. Select a Protocol (TCP, UDP, or Both) from the drop-down list.