- CNet Broadband Router User's Guide

CNet Technology Inc Broadband Router User Guide

DHCP Server

Operation

If Enabled, the Broadband Router will allocate IP Addresses to PCs on

your LAN. The default and recommended value is Enabled.

If you are already using a DHCP Server, this setting must be

DISABLED, and the existing DHCP server must be re-configured. See

Chapter 5 for further details.

Start IP Address

Finish IP Ad-

dress

The IP Start Address and IP Finish Address fields set the values used

by the DHCP server.

This range also determines the number of DHCP clients supported.

(Maximum 253.)

DNS (Domain Name Server)

DNS (Domain

Name Server)

IP Addresses

You do NOT need to enter DNS addresses UNLESS you are using a

Fixed IP Address on the WAN port. (Your ISP has allocated you a

fixed IP Address.) In this case, your ISP should recommend a DNS.

You need to enter that address or addresses here.

If using a Dynamic IP Address (DHCP Client), on the WAN port, the

DNS entries are optional.

Multiple DNS entries should be entered in the order you want them

accessed. (The first available DNS will be used.)

Routing Table

If your LAN contains an existing Router or Routers, refer to Chapter 6

- Routing.