Network Router User Manual

9
Chapter 3
Chapter 3Chapter 3
Chapter 3
Configuration
ConfigurationConfiguration
Configuration
This Chapter provides details of the configuration process.
Overview
This chapter describes the procedure for:
LAN setup
WAN port configuration for Internet Access
Wireless access point configuration
PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Con-
figuration.
Other configuration may also be required, depending on which features and functions of the
CNWR-811P you wish to use. Use the table below to locate detailed instructions for the re-
quired functions.
To Do this: Refer to:
Configure PCs on your LAN. Chapter 4:
PC Configuration
Learn more about using DHCP on the internal LAN Chapter 5:
DHCP
Configure the CNWR-811P and routers for a LAN which has 1
or more routers.
Chapter 6:
Routing
Set a password for the CNWR-811P, or disable NAT (Net-
work Address Translation).
Chapter 7:
Options
Use any of the following features:
Special Internet Applications
Virtual Servers
DMZ
Chapter 8:
Advanced Internet
Features
Limit Internet Access by individual workstations Chapter 9:
Access Control
Where use of a certain feature requires that
PCs or other LAN devices be configured, this
is also explained in the relevant chapter.
3