FAX NO. (904) 641-1697 TELEPHONE NO.
** ** In an effort to ensure that your shower enclosure arrives on time, we reserve the right to substitute an item of equal or greater value. In making substitutions, we take great care and consideration in selecting an item that will meet or exceed the substituted item.
1. According with left / right selection, trim both CST 900 profiles 1/2” longer than Panel height and width. 2. Position Sill (B) on center of curb. Using the Sill’s pre-drilled holes as guides, mark and drill three 1-1/2” deep installation holes using a 1/8” drill bit. Insert three Plastic Screw Anchors (D) into installation holes, reposition Sill (B) and secure it to curb using three Installation Screws (E). 3. Position Wall Jamb (A) against wall. Align mitered ends then plumb Wall Jamb.
