Installation & Assembly

10
“ILLUSION” FRAMELESS SHOWER ENCLOSURE
INSTALLATION INSTRUCTIONS
Need some help? Call our customer service team at 1-800-874-8601
Trim as Required
CST 965
Swing Direction
638 PHPT
STEP 9. SECURING DOOR ASSEMBLY IN PLACE
STEP 10. INSTALL JAMB CAPS
When satisfied with the door operation (the Door Strike [931 M]
should meet the magnet inside the Vinyl Strike Post and hold
with even spacing between door edge and strike post from top to
bottom), step inside the shower. Use your electric drill to secure
the Hinge Post to the Wall Jamb (CST 903) using three
Adjustment Screws (638 PHPT). You’ll want one screw in the
center, and the other two 3 inches from the top and bottom.
Install Jamb Caps (CP 965) on the top of both Wall Jambs. The
caps will likely stick out too far. You can trim them as needed.
CST 903
CP 965 B
CST 903
Swing Direction