Instructions / Assembly

( 3 )
Legend Continuous Hinge_05-01-2015
Decide which side you want your Door to swing from then slide
Hinge Post into appropriate Wall Jamb (detail above shows unit
striking on right side).
Decide which side you want your Door to strike and slide Strike
Jamb into appropriate Wall Jamb (detail above shows unit will strike
on right side).
Position Jambs on sill, mark and drill 3/16” installation holes on walls.
Insert Screw Anchors into holes and secure Wall Jambs to walls with
1-1/2” Installation Screws Provided. Note that adjustment holes are
toward interior.
Measure opening width and trim sill to 1/16” less than measurement
obtained. Caulk underside of sill and position it on center of curb.
Insure that sill lip faces toward outside of enclosure.