Installation Guide

ManualsBrandsCoastal Shower Doors ManualsBathLegend Series 56 in. x 66 in. Framed Neo-Angle Swing Shower Door in Chrome and Clear Glass

Legend Neo 03-20-2012

TELEPHONE NO.

(904) 642-3970

P.0. BOX 16091

JACKSONVILLE, FLORIDA 32245

Coastal Industries Inc.

FAX NO.

(904) 641-1697

L e g e n d

Neo Angle Shower Enclosure

Installation Instructions

(400 Series)

PATENTS PENDING

Summary of content (4 pages)

PAGE 1
FAX NO. (904) 641-1697 Coastal Industries Inc. P.0. BOX 16091 JACKSONVILLE, FLORIDA 32245 TELEPHONE NO.
PAGE 2
LEGEND NEO ANGLE SHOWER ENCLOSURE KEY LETTER A PART NUMBER 401 DESCRIPTION WALL JAMB B b1 b2 b3 b4 b5 ---235 404 407 6112PHS C 154 B SIDE PANEL ASSEMBLIES SIDE PANEL RAILS SIDE PANEL EXPANDER SIDE PANEL CORNER POST SIDE PANEL ASSEMBLY SCREW (not shown) SIDE PANEL GLAZING VINYL (not shown) 2 4 2 2 8 -- C c1 c2 c3 c4 c5 c6 c7 c8 c9 c10 c11 c12 c13 c14 c15 ---440 441 441 227 429 226 CP201 CP209 FW 10-093 98-42 C 176 B 6112PHS 6112PHS 5112FHSL C 173 B DOOR FRAME ASSEMBLY DOOR FRAME HEADER / SILL DOOR
PAGE 3
STEP 1 Positioning Wall Jambs Determine the curb centerline, then offset and mark a line 3/8 of an inch toward the outside of shower as shown in figure 1. Separate the Wall Jambs (A) from their respective End Panels (B) as shown in exploded view. Place Wall Jambs (A) up against shower walls . . . aligning their outside legs with the offset mark previously marked on base ledge. Use a level to plumb Wall Jambs (A).
PAGE 4
STEP 6 Caulk for a leak proof installation STEP 4 Door Frame Installation Fig. 5a Place the Door Assembly (C) between the Panel Assemblies (B) as shown. Starting with the pivot side first . . . engage the full length of the Panel Assembly tongue with the Door Assembly groove channel as shown in figure 5a. Snap the Door and Panel assemblies together. Make sure that Door and Panel assemblies are secured their entire length. Repeat step for the other side.