Specification

ManualsBrandsCoastal Shower Doors ManualsBathParagon Series 22 in. x 65 in. Framed Continuous Hinge Shower Door in Oil Rubbed Bronze with Clear Glass

10185-1

SECTION 10185

SHOWER AND BATH ENCLOSURES

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Shower doors.

B. Sliding enclosures.

C. Shower doors and panels.

1.2 RELATED SECTIONS

A. Section 06100 - Rough Carpentry; blocking.

B. Section 15400 - Plumbing Fixtures and Equipment; coordination with plumbing

fixtures.

1.3 REFERENCES

A. Aluminum Association (AA): Aluminum Association Designation System.

B. ADA and ABA Accessibility Guidelines for Buildings and Facilities.

C. American National Standards Institute (ANSI) Z97.1 Safety Glazing Materials Used

in Buildings Safety Performance Specifications and Methods of Test.

D. American Society for Testing and Materials (ASTM):

1. ASTM B221 - Standard Specification for Aluminum and Aluminum-Alloy

Extruded Bars, Rods, Wire, Profiles, and Tubes.

2. ASTM C162 - Terminology of Glass and Glass Products.

3. ASTM C1036 - Standard Specification for Flat Glass.

4. ASTM C1048 - Specification for Heat-Treated Flat Glass Kind HS, Kind FT

Coated ASTM C1172 - Specification for Laminated Architectural Flat Glass

5. ASTM C1464 - Standard Specification for Bent Glass and Uncoated Glass.

E. Consumer Product Safety Commission (CPSC) - 16CFR 1201 Consumer Product

Safety Commission Part 1201 Cat. II - Safety Standard for Architectural Glazing

Materials.

1.4 SUBMITTALS

A. Submit under provisions of Section 01300.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

Summary of content (9 pages)

PAGE 1
SECTION 10185 SHOWER AND BATH ENCLOSURES PART 1 GENERAL 1.1 1.2 1.3 1.4 SECTION INCLUDES A. Shower doors. B. Sliding enclosures. C. Shower doors and panels. RELATED SECTIONS A. Section 06100 - Rough Carpentry; blocking. B. Section 15400 - Plumbing Fixtures and Equipment; coordination with plumbing fixtures. REFERENCES A. Aluminum Association (AA): Aluminum Association Designation System. B. ADA and ABA Accessibility Guidelines for Buildings and Facilities. C.
PAGE 2
. 3. 1.5 1.6 1.7 Storage and handling requirements and recommendations. Installation methods. C. Shop Drawings: Show plans, elevations and installation details including attachment to adjacent construction. D. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns. E.
PAGE 3
A. Bypass Units - General: 1. Fully adjustable sealed ball bearing rollers. 2. Molded flexible PVC jamb bumpers with concealed fasteners. 3. Aquatex obscure glass. 4. Clear glass. 5. Glass pattern. Refer to drawings. 6. Graphics. Refer to drawings. B. Challenger Series - 3000: 1. 1/8 inch (3 mm) glass standard. 2. Finish: Brite Silver anodized aluminum. 3. Finish: Brite Gold anodized aluminum. 4. Finish: Brushed Nickel anodized aluminum. 5. Finish: Oil Rubbed Bronze anodized aluminum. 6.
PAGE 4
2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Finish: Brite Silver anodized aluminum. Finish: Brite Gold anodized aluminum. Finish: Brushed nickel anodized aluminum. Finish: Oil Rubbed Bronze anodized aluminum. Easy clean self-draining tub track with screw on molded nylon panel guide of sufficient height to prevent accidental dislodging of interior panel. Two single towel bars with solid anodized aluminum towel bar brackets and clear anti-reverse finger pulls. 1-1/4 inches (32 mm) glass frame.
PAGE 5
I. Paragon B Series - 5200: 1. Two part clamp style anodized aluminum glass hangers. 2. 3/16 inch (4.8 mm) frameless glass standard. 3. Finish: Brite Silver anodized aluminum. 4. Finish: Brite Gold anodized aluminum. 5. Finish: Brushed nickel anodized aluminum. 6. Finish: Oil Rubbed Bronze anodized aluminum 7. Easy Clean, self-draining tub track with Snap-On vinyl door guide with sufficient height to prevent accidental dislodging of interior panel. 8. Interlocking jambs 9.
PAGE 6
10. 11. 12. 13. 14. M. 2.3 Interlocking jambs. Notched wall jamb that fits over sill. Polished radius towel bars that mount through drilled holes in glass. Inline panel units as indicated. End panel units as indicated. Paragon Heavy Frameless Series - 6200: 1. Heavy duty bolt-on style anodized aluminum glass hangers. 2. Heavy duty ball bearing rollers. 3. 3/8 inch (9.5 mm) polished edge - frameless thru-hole glass standard. 4. Finish: Brite Silver anodized aluminum. 5.
PAGE 7
6. 7. 8. 9. 10. 11. 12. 13. 2.4 Finish: Brite Gold anodized aluminum. Finish: Silver Satin anodized aluminum. Modular design and application for easy installation. Full threshold. Full length built-in handle with full length magnetic latch. Adjustable strike jamb. 1-1/2 inches (38 mm) width adjustment. Built-in drip rail and vinyl sweep at door bottom. CONTINUOUS HINGE DOORS A. Legend Series: 1. Glass: Aquatex obscure glass. 2. Glass: Clear glass. 3. Glass Pattern: Refer to drawings. 4.
PAGE 8
11. 12. 13. 14. 15. 16. 17. 18. 19. 2.5 Hinge and pivot bushings shall be self-lubricating nylon 6/6 with stainless steel wear washers. Doors shall have continuous drip rail and vinyl wiper blade at bottom of panel. Framed Paragon units shall have aluminum drip rail sloped to drain water to the interior of the door when opened. Drip rail ends shall have plastic protective caps at both ends for safety. Latch to be permanently mounted magnetic strips for framed doors.
PAGE 9
3. 4. a. AA-M11-C31-A23 for Brite Anodized Aluminum. b. AA-M22-C31-A23 for Polished Brite Anodized Aluminum. Brushed Nickel: a. AA-M35C32A44 Oil Rubbed Bronze: a. AA-M10C22A44 C. Fasteners: 1. Screws and fasteners shall be stainless steel to prevent rust and corrosion. D. Glazing Materials: 1. Glazing materials shall be safety tempered glass with a nominal thickness of 0.125 inch (3.18 mm), 0.156 inch (3.96 mm) or 0.188 inch (4.78 mm) on obscure and clear framed panels, 0.188 inch (4.78 mm) or 0.