Specification

10185-2
2. Storage and handling requirements and recommendations.
3. Installation methods.
C. Shop Drawings: Show plans, elevations and installation details including attachment
to adjacent construction.
D. Selection Samples: For each finish product specified, two complete sets of color
chips representing manufacturer's full range of available colors and patterns.
E. Verification Samples: For each finish product specified, two samples, minimum size
6 inches (150 mm) long, representing actual extrusion, color, and finish.
1.5 QUALITY ASSURANCE
A. Manufacturer Qualifications: Firm specializing in manufacture of shower door
assemblies, with minimum 10 years experience.
B. Accessibility Requirements: Shower door assemblies shall comply with ADA-ABA
Accessibility Guidelines.
C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and
application workmanship.
1. Finish areas designated by Architect.
2. Do not proceed with remaining work until workmanship, color, and sheen are
approved by Architect.
3. Refinish mock-up area as required to produce acceptable work.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store and dispose of solvent-based materials, and materials used with
solvent-based materials, in accordance with requirements of local authorities having
jurisdiction.
1.7 PROJECT CONDITIONS
A. Verify field dimensions prior to fabrication to the greatest extent practical.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Coastal Industries, Inc. , which is located at: 3700 St.
Johns Industrial Pkwy. W. ; Jacksonville, FL 32246 ; Toll Free Tel: [phone];
Tel: [phone] ; Fax: [phone] ; Email: request info
([e-mail]); Web: www.coastalind.com
B. Jacksonville, FL 32246 Toll Free Tel: [phone]. Tel: [phone]. Fax:
[phone]. Email: ____. Web: http://www.coastalind.com.
C. Substitutions: Not permitted.
D. Requests for substitutions will be considered in accordance with provisions of
Section 01600.
2.2 ENCLOSURES