Specification
10185-7
6. Finish: Brite Gold anodized aluminum.
7. Finish: Silver Satin anodized aluminum.
8. Modular design and application for easy installation.
9. Full threshold.
10. Full length built-in handle with full length magnetic latch.
11. Adjustable strike jamb.
12. 1-1/2 inches (38 mm) width adjustment.
13. Built-in drip rail and vinyl sweep at door bottom.
2.4 CONTINUOUS HINGE DOORS
A. Legend Series:
1. Glass: Aquatex obscure glass.
2. Glass: Clear glass.
3. Glass Pattern: Refer to drawings.
4. Graphics: Refer to drawings.
5. Finish: Brite Silver anodized aluminum.
6. Finish: Platinum.
7. Finish: Brushed Nickel anodized aluminum.
8. Finish: Oil Rubbed Bronze anodized aluminum.
9. Heavy duty continuous hinge.
10. Full length built-in pull handle with full-length magnetic strip latching system.
11. Modular interlocking design, consisting of a pre-hung door that interlocks to
different panels to make Inline and Neo panel units.
12. Water seal inter-lock.
13. No parts to install.
14. Out-of-plumb panel adjustment.
15. Header cap.
B. Trident Series:
1. Glass: Aquatex obscure glass.
2. Glass: Clear glass.
3. Glass Pattern: Refer to drawings.
4. Graphics: Refer to drawings.
5. Doors shall have a continuous extruded ball and socket hinge that is integral
to the hinge stile and jamb.
6. Hinge and pivot bushings shall be self lubricating nylon 6/6.
7. Doors shall have an integral splash guard built into the rails and a vinyl wiper
blade inserted at bottom of panel.
8. Latch to be permanently mounted magnetic strips. Mechanical closure
devices not permitted.
9. Adjustable jamb to provide +/- 5/16 inch (8 mm) adjustment.
10. Door pull shall be an integral part of the door stile.
C. Paragon Stall System:
1. Glass: Aquatex obscure glass.
2. Glass: Clear glass.
3. Glass Pattern: Refer to drawings.
4. Graphics: Refer to drawings.
5. Finish: Brite Silver anodized aluminum.
6. Finish: Brite Gold anodized aluminum.
7. Finish: Brushed nickel anodized aluminum.
8. Finish: Platinum.
9. Finish: Oil Rubbed Bronze anodized aluminum.
10. Doors shall have a continuous extruded ball and socket hinge that is integral
to the hinge stile and jamb.