Specification
10185-6
10. Interlocking jambs.
11. Notched wall jamb that fits over sill.
12. Polished radius towel bars that mount through drilled holes in glass.
13. Inline panel units as indicated.
14. End panel units as indicated.
M. Paragon Heavy Frameless Series - 6200:
1. Heavy duty bolt-on style anodized aluminum glass hangers.
2. Heavy duty ball bearing rollers.
3. 3/8 inch (9.5 mm) polished edge - frameless thru-hole glass standard.
4. Finish: Brite Silver anodized aluminum.
5. Finish: Brite Gold anodized aluminum.
6. Finish: Brushed nickel anodized aluminum.
7. Finish: Oil Rubbed Bronze anodized aluminum.
8. Easy clean, self-draining tub track with screw-on vinyl door guide with
sufficient height to prevent accidental dislodging of interior panel.
9. Polished radius header.
10. Interlocking jambs.
11. Notched wall jamb that fits over sill.
12. Polished radius towel bars that mount through drilled holes in glass.
13. Inline panel units as indicated.
14. End panel units as indicated.
2.3 PIVOT DOORS
A. Paragon 3/8 Series
1. Glass: Clear 3/8 inch (9 mm) with polished edges. Cut outs per drawings for
pivot hinge
2. Finish: Polished Chrome plated brass.
3. Finish: Brushed Nickel plated brass.
4. Finish: Oil Rubbed Bronze plated brass.
5. All hardware shall be finished to match pivot hinge assemblies.
B. Paragon - PV Series:
1. Glass: Aquatex obscure glass.
2. Glass: Clear glass.
3. Glass Pattern: Refer to drawings.
4. Graphics: Refer to drawings.
5. Finish: Brite Silver anodized aluminum.
6. Finish: Brite Gold anodized aluminum.
7. Pivot plates and handle hardware shall be extruded aluminum finished to
match the unit. Plated hardware is not permitted.
8. Pivot jambs shall have continuous vertical vinyl seal.
9. Doors shall have continuous drip rail and vinyl wiper blade at bottom of panel.
Drip rail shall be sloped to drain water to the interior of the door when opened.
Drip rail ends shall have plastic protective caps at both ends for safety.
10. Doors shall be adjustable for precisely fit to wall conditions.
11. Latch shall be permanently mounted magnetic strips. Mechanical closure
devices not permitted.
12. Plastic cap covering the top of wall jamb on strike side.
C. Trident - TS Series:
1. Glass: Aquatex obscure glass.
2. Glass: Clear glass.
3. Glass Pattern: Refer to drawings.
4. Graphics: Refer to drawings.
5. Finish: Brite Silver anodized aluminum.