Installation & Assembly

“ILLUSION” FRAMELESS SHOWER ENCLOSURE

INSTALLATION INSTRUCTIONS

Need some help? Call our customer service team at 1-800-874-8601

STEP 13. INSTALL SUPPORT BAR (OPTIONAL)

STEP 14. LEAK PROOF YOUR INSTALLATION

1. Position the bracket over the top of the stationary glass panel using the vinyl pads to protect the glass on

both sides. (Note: The further from the wall, the more secure the panel will be.)

2. Adjust bar position and mark hole location.

3. Insert plastic screw anchor and secure Support Bar (C-5401) to the wall using a screwdriver.

4. Lock the adjusted bar in place using the two sets of screws located on the top of the bar.

IMPORTANT: Support Bar (C-5401) is included with all LHL 5775 models, but is not included on

LHL 4575 models.

To complete the installation, run a bead of clear, mildew-resistant clear silicone around the outside perimeter

of the unit. Follow the manufacturer’s instructions before using your new Coastal shower.