COASTER. 200409KE (B1-B4) FINE FURNITURE. EASTERN KING SIZE BED ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE www.coastercompany.
ITEM : 200409KE (B1-B4) ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove Hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly, 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. | Warning | 1. Don't attempt 10 repair ar modify parts that are broken or defective, Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ITEM : 200409KE (B1-B4) ASSEMBLY INSTRUCTIONS STEP 1 1.1 Align and fasten left and right side panel to headboard using sheet bolt, lock washer and flat washer (as per diagram shown). Tighten with Allen wrench. 1.2 Align and fasten left and right side panel to headboard bottom front panel using long bolt, lock washer and flay washer, Tighten with Allen wrench, STEP Unscrew drawer pull from the back of drawer front using sower driver (not included).
ITEM : 200409KE (B1-B4) ASSEMBLY INSTRUCTIONS STEP 4 4.1 Insert wood dowel to both end of foot board center pane] as per diagram shown. Align and fasten foot board center panel to left and right storage box with long bolt, lock washer, flat washer and tighten with Allen wrench, 4.2 Align and fasten support slat to lef and right storage box using Jon flat head screw and tighten with screw driver (not included). 4.
ITEM : 200409KE (B1-B4) ASSEMBLY INSTRUCTIONS STEP 6 6.1 Align and fasten short and long trestle bar with L bracket to bed slat support with leveler using short flat head screw and tighten with screw driver{not included). 6.2 Align and fasten long trestle bar with L bracket to the left and right side panel using short flat head screw and tighten with screw driver(not included). STEP 7 7.0 Align and fasten roll slat to center tail using long bolt and tighten with Allen wrench. 7.