203501Q (B1&B2) R QUEEN SIZE BED ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE www.coastercompany.
ITEM : 203501Q (B1&B2) ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1.Remove hardware from box and sort by size. 2.Please check to see that all hardware and parts are present prior to start of assembly. 3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. Warning! 1.Don't attempt to repair or modify parts that are broken of defective. Please contact the store immediately. 2.This product is for home use only and not intended for commercial establishment.
ITEM : 203501Q (B1&B2) ASSEMBLY INSTRUCTIONS 203501Q (B1) - BOX 1 STEP 1 STEP 2 Place headboard panel (A) facing downward on soft Align and fasten right (B) & left (C) headboard legs to surface,and install right (B) & left (C) headboard legs to headboard panel (A) using bolt(1), lock washer (4)& flat headboard panel (A) as per diagram shown. washer (3) ,then tighten with Allen wrench(2).
ITEM : 203501Q (B1&B2) ASSEMBLY INSTRUCTIONS STEP 4 Loosen the bolt. Align & hook bed rail (F) to headboard (HB) & footboard (H). HB F H STEP 5 Align and fasten bed slat support with leveler (E) to bed slat (D) using bolt (7) & tighten with small Allen wrench (8). STEP 6 6.1) Fully tighten all the bolts at step 4 with big Allen wrench (9). 6.2) Align & fasten bed slat (D) to bed rail (F) using short flat head screw (5) & tighten with screw driver (NOT INCLUDED).