ANTI - TIPPING KIT HARDWARE IDENTIFICATION PARTS IDENTIFICATION 1 SET A. CHEST This tip restraint must be attached to a wall stud using long screw enclosed. STEP 1 Attach a bracket securely to the back top rail of the chest using short screw provided, through the smaller hole. 1. SHORT SCREW 1PC 2. LONG SCREW 1PC 3. CABLE TIE 1PC 4. 'L' BRACKET 2PCS STEP 2 Locate the other bracket on the wall over a wall stud and two inches below the mounting bracket secured to the back of chest.