ANTI-TIPPING KIT PARTS IDENTIFICATION HARDWARE IDENTIFICATION NO | FIGURE DESCRIPTION QTY 1 L-BRACKET PCS 2 Cr CABLECAST | IPC CHEST IPC 3 LONG SCREW | 1PC 4 (DX SHORT SCREW | 1PC PLASTIC ANCHOR | 1PC 1.1 Attach one of the mounting brackets securely to the back edge of the chest, Use the short screw. 1.2 Determine where the chest is to be placed and mark location on the wall for the mounting bracket screw hole approximately 2" below the bracket mounted to the edge of the chest. 1.
