ITEM: 801408 ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION ASSEMBLY TIPS: 1.Remove hardware from box and sort by size. 2 Please check to sae that all hardware and parts are present prior to start of assembly. 3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. A Warning! 1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2.This product is for home use only and not intended for commercial establishment.
ITEM: 801408 ASSEMBLY INSTRUCTION Zz HARDWARE PACKAGE NO| DESCRIPTION FIGURE QTY |[NO| DESCRIPTION FIGURE QTY ANTI TIP STRAP WALL SCREW 7 | 170x15mm = P08 | 8 | 428mm SO res WALL PLUG 8 | born ra PCS | 10 | SCREW pdxi6mm «3 orcs STEP 1: ‘Apply glue on all wooden dowels to ensure integrity of the structure. COASTER. page 3 of 10 Wwww.coastercompany.
ITEM: 801408 ASSEMBLY INSTRUCTION STEP Apply gue on al wooden ly to ensure integrity of the structure. STEP ‘Apply glue on all wooden dowses to ensure integrity of the structure COASTER. page 4 of 10 Wwww.coastercompany.
ITEM: 801408 ASSEMBLY INSTRUCTION STEP 4: ‘Apply glu on ail wooden dowses to ensure integrity of the stricture. STEPS: COASTER. page Sof 10 Wwww.coastercompany.
ITEM: 801408 ASSEMBLY INSTRUCTION STEP "Apply glue on all wooden dowels ET 10 ensure integrity of the structure. STEP 11: "Apply glue on all wooden dowels Ls ; to ensure integrity of the structure. “ Lr COASTER. page 8 of 10 Wwww.coastercompany.
ASSEMBLY INSTRUCTION ITEM: 801408 ‘Apply glue on all wooden dowels 10 ensure integrity of the structure ) STEP 13: ‘Apply glue on all wooden dowses to ensure integrity of the structure page 9 of 10 www.coastercompany.com COASTER.
ITEM: 801408 ASSEMBLY INSTRUCTION STEP 14: ATTENTION: ANTI TIPPING SAFEGUARD (1) WALL Please install the anti-tipping hardware as shown in the drawing. This can help to prevent any tipping issues. Pa (2) WALL WALL | FURNITURE TIEPIN RESTRAINT WARNING Haney mer semiotics duping Bunion COASTER. page 10 of 10 Wwww.coastercompany.
