ANTI-TIPPING KIT PARTS IDENTIFICATION HARDWARE IDENTIFICATION AN ACCENT CABINET 1PC PLASTIC BRACKET PCS 2 ce CABLE TIE SCREW PCS 4 @ SHORT SCREW ~~ PCS s @F® PLASTIC ANCHOR PCS 1.1 Attach one of the mounting brackets securely to the back edge of the cabinet. Use the short screw. 1.2 Determine where the cabinet is to be placed and mark location on the wall for the mounting bracket screw hole approximately 2" below the bracket mounted on the edge of the cabinet. 1.3 Drill a 3/16" hole in the wall.