ITEM: 950785 ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION ASSEMBLY TIPS: A warming: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered fo assure fast & easy assembly. 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2.
ITEM: 950785 ASSEMBLY INSTRUCTION Zz HARDWARE PACKAGE NO| DESCRIPTION FIGURE QTY |[NO| DESCRIPTION FIGURE QTY ANTI-TIP STRAP WALL SCREW 20 170x15mm = PCs | 22 @4x25mm prs PCS 21 | WALL PLUG A PCS | 23 | SCREW ax16mm oD PCS STEP 1: INCORRECT CORRECT b 0 "Apply glue on all wooden dowels to ensure integrity of the structure COASTER. FINE FURNITURE page 4 of 12 www.coastercompany.
ITEM: 950785 ASSEMBLY INSTRUCTION STEP ‘Apply glue on all wooden dowels to ensure integrity of the structure. COASTER.
ITEM: 950785 ASSEMBLY INSTRUCTION STEP 3 : STEP 4: Apply glue on all wooden dowels fo ensure integrity of the structure, COASTER.
ITEM: 950785 ASSEMBLY INSTRUCTION STEPS : ‘Apply glue on all wooden dowels 10 ensure integrity of the structure. ‘Apply glue on all wooden dowels 10 ensure integrity of the structure. COASTER.
ITEM: 950785 ASSEMBLY INSTRUCTION STEP STEPS: ‘Apply glue on all wooden dowels to ensure integrity of the structure. COASTER. FINE FURNITURE page 8 of 12 www.coastercompany.
ITEM: 950785 ASSEMBLY INSTRUCTION STEPS “Apply glue on all wooden dowels 10 ensure integrity of the stricture. STEP COASTER.
ITEM: 950785 ASSEMBLY INSTRUCTION STEP 15 : STEP 16 : ATTENTION: ANTI TIPPING SAFEGUARD (1) WALL Please install the anti-tipping hardware as shown in the drawing. This can help to prevent any tipping issues. fe J (2) WALL WALL Ii FURNITURE TIPPING RESTRAINT. WARNING TE Th aesthetic is pot sbi id Si This resin ii rive pi ist ping nothing cli i Plight den fis nes COASTER.