User Manual

Direct Drive
12 • COATS 1001 Wheel Balancer
MAG
Use Mag Button.
Enter rim diameter as read
from the sidewall.
Move distance gauge arm to
touch inner edge of wheel.
Enter distance gauge reading.
Read INNER weight amount
and locate position for inner
plane. Standard clip weight
will be placed here.
OUTER adhesive weight
will be applied here.
Read OUTER weight amount and
locate position for outer plane, Install
weight as described on page above.
Measure rim width “W”
with rim width calipers and
enter this measurement.
Note: Be sure adhesive weights will clear disc brake calipers.
MAG
Use Mag Button.
Enter rim diameter as read
from the sidewall.
OUTER adhesive
weight will be
applied here.
INNER adhesive
weight will be
applied here.
Note: Be sure adhesive weights will clear disc brake calipers.
3. Two Adhesive Weights
(Hidden Method)
2. Standard Clip Weight -
One Adhesive Weight
(Hidden Method)
Move distance gauge arm
to here and enter distance
gauge readings.
Read INNER weight amount
and locate position for inner
plane. Install weight as
described on page above.
Measure rim width “W”
with rim width calipers and
enter this measurement.
Read OUTER weight amount
and locate position for outer
plane. Install weight as
described on above.