User guide

Mounting Hub Centered

Wheels

For Use With COATS

Wheel Balancers

Hennessy Industries • 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086 • (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Instructions

1. Mount the backing plate over the balancer shaft.

Be sure the cup is facing outward as in figure.

2. Position the wheel assembly over the balancer

shaft and front cone.

3. On some wheels it may be necessary to use a

standard cone as a spacer before tightening the hub

nut.

4. Tighten the hub nut securely and balance the

wheel according to the balancer operating instructions.

PAGE 1
Mounting Hub Centered Wheels For Use With COATS® Wheel Balancers Hennessy Industries • 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086 • (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com Instructions 1. Mount the backing plate over the balancer shaft. Be sure the cup is facing outward as in figure. 2. Position the wheel assembly over the balancer shaft and front cone. 3. On some wheels it may be necessary to use a standard cone as a spacer before tightening the hub nut. 4.