User manual

iNetVu™ 5000 Controller User Manual Page 25 of 77
10.3. Starting iNetVu™ Mobile
iNetVu™ Mobile Software is typically installed into your ‘Startup’ folder, and will remain
active, but minimized in your System Tray. Should you not see the iNetVu™ ‘Swirl’ icon
in your System Tray, see below for starting up the iNetVu™ Mobile Software manually.
1. Click Start → Programs → iNetVu → iNetVu Mobile
OR
2. Click the iNetVu™ Mobile shortcut icon on the desktop.
10.4. iNetVu™ 5000C Controller Basic Operations
With the installation of iNetVu™ Mobile Software (IMS) Version 4.8.1+, IMS will always
automatically start up when you turn on your PC. A small red icon will appear in the
System Tray notifying you that IMS is running, and is ready for operation.
The ability to perform the basic operations of Finding Satellite, Stowing the Antenna, and
Stopping Operations, is now accessible without opening up any of the IMS menus.
10.4.1. How to Find Satellite
• Press “FIND SAT” and hold for 1 second.
• iNetVu™ Mobile Platform will automatically attempt to locate and lock onto the
satellite.
• The iNetVu™ Mobile Software will ‘beep‘ during the satellite peaking process to
indicate the strength of the received signal.
• When the iNetVu™ Swirl icon in your System Tray turns green, you are now
connected and ready to surf.