User manual

C-Com Satellite Systems Inc Page 44 of 77
iNetVu™ 5000 Controller User Manual
Revision 1.0.2
System Status
Displays current system environment
• System Running
Software is currently booting.
• System Idle
No operations are currently being performed.
• System Online
iNetVu™ system has found and locked onto the satellite, and is now ready for surfing the Internet.
• ACP Testing
ACP Testing is being performed.
• Skew Adjusting
Polarization adjustment for receiving the optimal Signal Strength. Polarization will rotate in both
directions to locate the 3dB drop in Signal Strength, and then re-center itself using the best
possible Polarization Angle.
• Manual Operation
Manually controlled movement via Advanced Controls menu has been detected.
• Mount Testing
System test or demo being performed via System Test and Demo menu.
• Peaking on Satellite
System makes minor adjustments in positioning in order to receive optimal Signal Strength.
• AZ Calibration
Azimuth Calibration is being performed.
• PL Calibration
Polarization Calibration is being performed.
• EL Calibration
Elevation Calibration is being performed.
• CP Calibration
Compass Calibration is being performed.
• Going to Position
An automatic movement command has been initiated (i.e. Find Satellite or
Deploy Antenna) and the antenna is moving into the designated position.
• Searching Satellite
Antenna is performing a search pattern to locate the satellite.
• Stowing Antenna
Antenna is being stowed.
• Antenna Stowed
Antenna is currently stowed.
• Unknown Status