User manual

C-Com Satellite Systems Inc Page 75 of 77
iNetVu™ 5000 Controller User Manual
Revision 1.0.2
PLATFORM TYPES
MF740 ME740 A0740B A1800A A0660A
EL FAST 9 9 9 9 9
EL SLOW 4 4 4 7 4
EL CALIBRATE 7 7 7 7 7
EL CURRENT3 1.60 1.60 1.60 1.60 1.60
EL CURRENT6 5.00 5.00 5.00 5.00 5.00
EL CURRENT9 12.50 12.50 12.50 12.50 12.50
AZ FAST 8 8 8 9 8
AZ SLOW 4 4 4 6 4
AZ CALIBRATE 7 7 7 7 7
AZ CURRENT3 1.30 1.80 1.80 1.80 1.80
AZ CURRENT6 3.50 4.50 4.50 5.50 4.50
AZ CURRENT9 6.00 8.00 8.00 9.00 8.0
PL FAST 9 9 9 9 9
PL SLOW 7 7 7 4 7
PL CALIBRATE 7 7 7 7 7
PL CURRENT3 0.40 0.40 0.40 0.40 0.40
PL CURRENT6 1.20 1.20 1.20 1.20 1.20
PL CURRENT9 1.50 1.50 1.50 1.50 1.50
Fig. 61: Default values for speed and current limits
Disable Limits
Disables UP, DN, and ST limits for testing and
troubleshooting. In the event that a limit is disabled, a
yellow colored “F” will appear in the Advanced Controls
menu to alert the user that a limit has been disabled.
Speed Current Calibration Enabled
Enables a calibration process that optimizes the current
protection values for the motors and allows for elevation
to be calibrated.
Note: It is recommended to leave this option disabled.