Operating instructions

CPS:Doc 20017 V1 24/01/2012 Page 11 Issue 1 24/01/2012
Description Of Remote Status Connections / Functions
Pin 3 Incident power. Pin 3 is an analogue output voltage 0-5 volts representing zero to maximum output
power.
N.B. This output can source 5mA.
Pin 4 Reflected power. Pin 4 is analogue output voltage 0-5 volts representing 0-maximum output power.
N.B. This output can source 5mA.
Pin 14 RF Off light. Pin 9 is an open collector transistor that grounds with RF Off. This can sink 45mA
20V.
Pin 19 RF On light. Pin 9 is a open collector transistor that grounds with RF On. This can sink 45mA
20V.
Pin 20 +5V. This is a +5V 500mA Output.
Pin 7,8 Ground