Operating instructions
CPS:Doc 20017 V1 24/01/2012 Page 15 Issue 1 24/01/2012
Description Of 3 Phase Mains Input Connection
Round connector pinout
Pin 1 Reserved
Pin 2 Reserved
Pin 3 Live Phase 2
Pin 4 Earth
Pin 5 Live Phase 3
Pin 6 Live Phase 1
Pin 7 Neutral
Neutral is mandatory, failure to provide
a neutral will result in damage
Pulse Operation.
Pulse mode is selected by the Pulse / CW switch on the front panel. The pulse signal
should be TTL (active high). Minimum pulse width is 40s and with duty cycle from 1%
to CW (duty cycle below 1% will cause power level to deviate from set value). The front
panel displays (and remote outputs) store the last value of output power from the pulse,
maintaining the reading for the duration of the off time.
Cleaning
To clean the surface of the generator turn off and isolate from mains, use a dry clean
cloth. For heavy soiling, slightly dampen the cloth with water but always ensure that no
water enters the generator.
Warranty
Coaxial Power Systems Ltd offer a warranty for parts and labour (if returned to factory)
for 1 year from date of despatch. The warranty is invalidated if the generator has
suffered inappropriate treatment i.e. excessive vibration, mechanical denting or
dropping, accidental liquid spill, excessive applied voltage to remote connectors etc.
Coaxial Power Systems Ltd should be notified of all warranty claims before return of
equipment.