Owner`s manual

Page 8 of 23 9033 Owner’s Manual •
••
• (V 0.5)
The 9033 is an analog to digital converter that also features an embedder which can embed both analog
audio and AES. For the audio embedded on the SDI output, the card acts as a router that can map any
input channel to any channel on the embedded SDI output. The router inputs are de-embedded audio,
discrete AES audio, and differential analog audio.
Each router for the embedded output provides a gain and polarity control, and each router output can
be sourced from any input channel. This router feature gives your 9033 a great deal of flexibility.
There is also a video proc module to allow any necessary corrections to the inbound video signal. It has
separate controls for Luma gain (Y channel), Saturation (C channel gain), Lift (Y channel offset), and
Phase adjustment (C channel).
Supported Audio and Video Formats
Input and Output Video
The 9033 supports a wide range of video formats. The output video rate is always precisely the same
as the input video rate. Video delay through the device is less than one microsecond.
Table 1. Supported Analog and SDI formats
Video standard
1080 sF 23.98
1080 p 23.98
1080 sF 24
1080 p 24
1080 i 25
1080 p 25
1080 i 29.97
1080 p 29.97
1080 i 30
1080 p 30
720 p23.98
720 p24
720 p 25
720 p 29.97
720 p 30
720 p 50
720 p 59.94
720 p 60
486 i 29.97
575 i 25
Notes:
1. All rates translated to effective frame rates, interlaced rates “ i ” are two times the number shown.
For example, i 29.97 is 59.94 fields per second (two fields per frame thus the interlaced frame rate
is 29.97); but progressive “ p ” 29.97 is 29.97 frames per second.
2. SD active line rates are PAL (575) and NTSC (486).