User manual

SSL settings

Cobalt RaQ XTR User Manual 85

Enable SSL on a virtual site

To enable SSL on a virtual site:

1. Select the Server Management tab at the top. The “Virtual Site List” table

appears.

2. Click the green pencil icon next to the virtual site on which you want to

enable SSL. The “User List” table appears.

3. Select Site Settings > General on the left side.

4. Click to enable (check mark) the check box Enable SSL.

5. Click Save Changes.

The RaQ XTR saves the conﬁguration of the virtual site.

☞

Important: The RaQ XTR Administrator can enable SSL on only

one name-based virtual site on an IP address. The UI does not allow

the administrator to enable SSL on a second name-based virtual site

that shares the same IP address.

✍

Note: Only the RaQ XTR Administrator can modify the virtual site

settings. For Site Administrators who are not the RaQ XTR

Administrator, the SSL Settings section is a read-only status page.

✍

Note: This feature only enables the public Web server; it does not

enable the SSL administrative server. See “SSL certiﬁcate for the

main site” on page 89.