User manual

Chapter 5: Server Management

162 Cobalt RaQ XTR User Manual

Knox Arkeia

To conﬁgure the Knox Arkeia backup and restore solution:

1. Select Server Management > Backup and Restore > Knox Arkeia. The

“Knox Arkeia Backup Settings” table appears. See Figure 79.

2. Enter the following information:

• Enable Client—Click to enable the check box to enable the Knox

Arkeia backup client.

• Backup Server Name—Enter the fully qualified domain name of the

Knox Arkeia backup server.

• Port Number—The Knox Arkeia Backup client needs to know the port

number through which to communicate with other hosts using Knox

services including the Knox Arkeia Backup server.

The default port is 617.

3. Click Save. The table refreshes and displays the new conﬁguration.

To conﬁgure the Knox Arkeia backup server, see Appendix F, “Disaster Recovery

with Third-Party Software”.

Figure 79 shows the “Knox Arkeia Backup Settings” table.

Figure 79. Knox Arkeia Backup Settings table

☞

Important: Changing this port number is not recommended unless

absolutely necessary. If you change the port number, ensure that

other hosts on the network using Knox services are also conﬁgured

to use the port you specify here.