User manual

Installing a PCI expansion card

Cobalt RaQ XTR User Manual 225

4. Unfasten the eight screws that attach the cover to the RaQ XTR chassis

(three screws on each side and two screws at the rear of the chassis).

5. Working from the rear of the chassis, slide the cover back approximately

three inches (see Figure 109).

6. Lift up the rear of the cover ﬁrst and then remove the cover from the chassis.

Figure 109.

Removing the cover

✍

Note:

Ensure that the front panel is completely slid back into the

chassis before attempting to remove the cover.