User manual

41
Appendix A
Using the LCD Console
During startup, the LCD screen displays status information
about the boot process itself.
During setup, the LCD console is used to enter NASRaQ
network conÞguration information.
Once the NASRaQ is running, the LCD console also serves
multiple purposes. You can use it to:
¥ Change network conÞguration information, which is
useful if the NASRaQÕs location has changed.
¥ Reboot, which restarts the entire system.
¥ Power down in a way that allows the NASRaQ to close
all open Þles and minimizes startup time the next time
the NASRaQ is powered on.
IMPORTANT: Before turning off the NASRaQ, be sure to follow
the proper power-down procedure (see“Powering Down” on
page 43).
To access each of these functions, hold down the (S)elect
button on the LCD console for approximately two seconds.
This causes the LCD screen to enter its function mode. Press
the Select button until the function you want appears on the
LCD screen. To cancel the LCDÕs function mode, select the
EXIT function (when it appears on the screen), then press the
Enter button, then select YES.
See ÒUsing the LCD Console to ConÞgure the NetworkÓ on
page 11 for information on using the LCD console controls.