User manual

Appendix A

The LCD screen displays:

PLEASE SWITCH

POWER OFF NOW

5. Press the On/Off switch to turn off the NASRaQ.

Resetting Network Conﬁguration

The ÒReset NetworkÓ function resets:

¥ The hostname

¥ IP address

¥ Netmask

¥ Gateway

¥ DNS information for both network interfaces (Primary

and Secondary)

Resetting the NASRaQ returns it to its factory default

settings. This function may be useful if youÕre moving the

NASRaQ to a new network.

To reset the NASRaQÕs network state:

1. From the LCD console, hold down the

Select button for

approximately 2 seconds.

The LCD screen displays:

SELECT:

SETUP NETWORK

2. Press the Select button three times until RESET NETWORK

appears in the LCD display:

SELECT:

RESET NETWORK

3. Press the Enter button.

4. Use the LCD control buttons to toggle the cursor

between [Y] and [N]. Select [Y] to reset the network

conÞguration.

5. After resetting, the NASRaQ powers down and the LCD

displays:

PLEASE SWITCH

POWER OFF NOW