User manual

47
Appendix C
Advanced Information
Resetting the Admin Password
If you forget the NASRaQ administrator password, you can clear
it by following these steps:
1. Push and hold a paper clip in the Reset Password port (on
the front of the NASRaQ). Hold the button in for
approximately 2 seconds.
The LCD screen displays:
RESETTING ADMIN
PASSWORD
!
Caution: After you clear the password, enter a new one as soon
as possible, to protect the security of the NASRaQ —
otherwise, at this point, anyone on the network can assign the
administrator password. Follow the steps below to enter a new
password.
2. In your Web browser, enter the URL
http://IP address/admin/ to access the Administrator Site.
3. If a prompt appears asking for a username or password,
enter ÒadminÓ as the username, and enter any name or word
as the password.
4. Click Users on the left side of the screen.
5. Click Administrator at the top of the screen.
6. In the Administrator Settings table, enter a new password
(twice).
7. Click Save Changes.