User manual

Administration site
Cobalt Qube 3 User Manual 103
Resetting the Qube 3 Administrator password
When the Qube 3 Administrator password is cleared, the root account is not
accessible until a new administrator password is assigned.
If you forget the password for the Qube 3 Administrator, you can reset the
password:
1. Push and hold a paper clip in the recessed Reset Password button (on the
back of the Qube 3; see Figure 1). Hold the button in for approximately 2
seconds.
The LCD screen displays
RESETTING ADMIN
PASSWORD
2. Enter the following URL in your Web browser to access the Administration
Site:
http://<hostname>.<domainname>/login/
3. If a prompt appears asking for a username or password, enter admin as the
username and “admin” as the password. Click OK . The Administration
Site screen opens as shown in Figure 35.
4. To modify the Administrator password, follow the steps in “Account” on
page 89.
!
Caution: After you clear the password, enter a new one as soon as
possible to protect the security of the Qube 3.At this point, anyone
on the network can assign the Qube 3 Administrator password until
you assign a new one.
✍
Note: The system automatically sets the admin password to
“admin” when you use the Password Reset button.