User manual

Chapter 5: Administration Site

168 Cobalt Qube 3 User Manual

Conﬁguration for cable modem or DSL

Complete this section only if you intend to connect the Qube 3 to the Internet

with a cable modem or digital subscriber line (DSL) modem. You need a cable

modem or DSL modem, and an account with an ISP.

Ensure that you connect the modem to the secondary network interface on the

back of the Qube 3; see Figure 6 on page 12.

To conﬁgure the Qube 3 Internet settings for a cable modem or for DSL service:

1. Select Administration > System > Internet to open the Internet Settings

table.

2. If it does not open in the desired mode, click on the Change Internet

Connection pull-down menu and select Cable Modem or DSL. The Cable

Modem or DSL table appears; see Figure 84.

Figure 84. Internet Settings for Cable Modem or DSL table