User manual

Chapter 5: Administration Site

170 Cobalt Qube 3 User Manual

To conﬁgure the Qube 3 Internet settings for an analog modem or for ISDN:

1. Select Administration > System > Internet to open the Internet Settings

table.

2. If it does not open in the desired mode, click on the Change Internet

Connection pull-down menu and select Analog Modem or ISDN. The

Analog Modem or ISDN table appears; see Figure 85.

Figure 85. Internet Settings for Analog Modem or ISDN table

3. Conﬁgure the following settings:

• Connection Status. Connection status indicates whether the modem is

currently connected to your ISP.

• Connection Mode. From the pull-down menu, select the Connection

Mode: Always On, Always Off or On Demand only. On Demand means

the Qube 3 establishes a connection to the Internet only when prompted

to by the system (for example, when checking email)