User manual

System
Cobalt Qube 3 User Manual 173
Time
To specify the time, date, and time zone settings for the Qube 3:
1. Select Administration > System > Time. The Time Settings table opens;
see Figure 86.
2. Use the pull-down menus to set the time, date, and time zone.
3. You may optionally enter the host name or IP address of a Network Time
Protocol (NTP) server if you want the Qube 3 to automatically synchronize
its internal clock every night.
You can find a list of publicly available NTP servers at:
http://www.eecis.udel.edu/~mills/ntp/servers.html.
4. Click Save.
Figure 86. Time Settings table