User manual

Active Monitor
Cobalt Qube 3 User Manual 189
Active Monitor Settings
To configure the Active Monitor settings:
1. Select Administration > Active Monitor > Settings. The Active Monitor
Settings table appears; see Figure 98.
2. Configure the settings in the Active Monitor Settings table.
• Enable Monitoring. This check box enables or disables Active Monitor.
Enabling this feature allows the system components to be regularly
checked for proper operation.
• Alert Notification Emails. Specify the email address(es) to which the
Active Monitor sends email alert messages. The default is the user
admin.
If you add more than one email address, enter each one on a separate
line or separate the addresses with spaces.
• Monitored Components. Select the specific system components to be
regularly checked by Active Monitor. The left column shows the system
components which are currently being monitored. The right column
shows the system components which could possibly be monitored. To
add a system component to be monitored, move the system component
from the right column to the left column.
Figure 98. Active Monitor Settings table