User manual

Appendix A: Using the LCD Console
202 Cobalt Qube 3 User Manual
Reboot
To reboot the Qube 3 through the LCD console:
1. On the LCD console, hold down the button for approximately two
seconds. The LCD screen displays:
SELECT:
SETUP NETWORK
2. Press the button until REBOOT appears in the LCD screen:
SELECT:
REBOOT
3. Press the button.
4. Use the arrow buttons to toggle the cursor between [Y] and [N]. Select [Y] to
reboot the system.
5. Press the button.
You can also reboot the Qube 3 through the Web browser:
1. On the Server Desktop, select Administration > System > Power .
A screen appears with a Reboot Now button.
2. Click Reboot Now .
A warning dialog appears, asking whether you want to reboot the server
appliance.
3. Click OK .
The screen states that the server appliance is now rebooting and that it should
be available again in a few minutes.