User manual

Power down
Cobalt Qube 3 User Manual 203
Power down
To power down the Qube 3:
1. On the LCD console, hold down the button for approximately two
seconds. The LCD screen displays:
SELECT:
SETUP NETWORK
2. Press the button until POWER DOWN appears in the LCD screen:
SELECT:
POWER DOWN
3. Press the button.
4. Use the arrow buttons to toggle the cursor between [Y] and [N]. Select [Y] to
power down the system. The LCD screen displays:
PLEASE SWITCH
POWER OFF NOW
5. Press the On/Off button on the back panel to turn off the Qube 3.
!
Caution: To prevent the potential loss of data, it is important to
follow the proper power-down procedure before turning off the
Qube 3.
✍
Note: If you have the Qube 3 Professional Edition (with RAID),
wait a few seconds before pressing the On/Off button.