User manual

Reset filters and static routes
Cobalt Qube 3 User Manual 205
To re-enable the filtering rules through the Server Desktop:
1. On the Server Desktop, select Administration > Network Services > Basic
Firewall .
The Firewall Settings table appears.
2. Click the check box Enable Firewall.
3. Click Save .
Reset filters and static routes
The Reset Filters function turns off the IP firewall filtering rules and provides the
option to reset static routes, meaning that the static routes are deleted.
To reset the filtering rules:
1. On the LCD console, hold down the button for approximately two
seconds. The LCD screen displays:
SELECT:
SETUP NETWORK
2. Press the button until RESET FILTERS appears in the LCD screen:
SELECT:
RESET FILTERS
3. Press the button.
4. Use the arrow buttons to toggle the cursor between [Y] and [N]. Select [Y] to
disable the IP filters.
5. Press the button.
6. If you select Yes, the LCD screen displays:
RESETTING
FILTERS
7. Regardless of a Yes or No selection in Step 6, the LCD screen now displays:
RESET ROUTES?
[Y]ES / [N]O
8. Use the arrow buttons to toggle the cursor between [Y] and [N]. Select [Y] to
reset the static routes.
9. If you select Yes, The LCD screen displays:
RESETTING
ROUTES