User manual

Cobalt Qube 3 User Manual 221
Appendix D
Advanced Information
High-speed serial port
For information on using the high-speed serial port, see “Configuration for an
analog modem or ISDN” on page 169.
High-speed serial port as a serial
console port
You can use the high-speed serial port to establish a terminal connection to the
Qube 3.
To use the high-speed serial port as a serial console port, you must change the
current state of the console function to on or off. To do this, you must reboot the
Qube 3 while holding in the recessed Reset Password button on the back panel of
the Qube 3. See Figure 1 on page 2.
To reboot the Qube 3 from the LCD panel, see “Reboot” on page 202.
When you reboot the Qube 3 in this manner, the LCD screen displays either:
CONSOLE ON
or
CONSOLE OFF