User manual

Secondary services
Cobalt Qube 3 User Manual 241
Figure 113. Add Secondary Domain table
Secondary service for a network
To add a secondary name-server authority for a network:
1. Select Administration > Network Services > DNS .
The DNS Settings table appears.
2. Click Edit Secondary Services above the table. The Secondary Service List
table appears.
3. Select Network Secondary Service from the Add Secondary Service...
pull-down menu. The Add Secondary Service table appears; see Figure 114.
4. In the first field, enter the IP address of a member on the network (for
example, 192.168.1.1) whose DNS information is served by the IP address
in the third field.
5. In the second field, enter the subnet mask corresponding to the IP address for
the specified network authority.
6. In the third field, enter the IP address of the primary DNS server for the
specified network.
7. Click Save . The Secondary Service List table reappears with the new entry.
8. To add another secondary service, select a service from the pull-down menu
again.
To apply the changes to the DNS settings, click Apply Changes Now . The
DNS Settings table appears.
Figure 114. Add Secondary Network table