User manual
Chapter 1: Introduction
6 Cobalt Qube 3 User Manual
Personal Profile screen
The
Personal Profile
screen (Figure 5) is where users access and configure the
personal settings on the Qube 3.
Figure 5.
Personal Profile screen
Qube 3 usage requirements
To use the Qube 3, you need:
• A 10/100BaseTX Transmission Control Protocol/Internet Protocol (TCP/IP)
-based local area network (LAN).
• A personal computer (attached to the network) that uses a Web browser (for
example, Netscape Navigator, version 4.7 or later, or Microsoft Internet
Explorer, version 5.0 or later).
To manage the Qube 3 from the Server Desktop, you must enable cookies,
cascading style sheets and Javascript on your browser (these features are
normally enabled by default).
• Network parameters, which you can obtain from your system or network
administrator; these include the Qube 3’s assigned IP address, the subnet
mask of your network and, if communicating with other networks, a gateway
or router address.
• An Internet service provider (ISP), if you plan to connect to the Internet.