User manual

Chapter 2: Setting up the Qube 3
14 Cobalt Qube 3 User Manual
Figure 7. LCD console
During startup, the LCD screen on the back of the Qube 3 displays status
information about the boot process itself. When setting up the Qube 3, you use
the LCD console to enter network configuration information. Once the Qube 3 is
running, the LCD console is used to change network configuration information,
reboot the unit and power down the unit.
The arrow buttons function as follows:
The Left arrow button moves the cursor to the left.
The Right arrow button moves the cursor to the right.
The Up arrow button increases the digit located at the cursor position.
The Down arrow button decreases the digit located at the cursor position.
The “select” button displays the next option.
The “enter” button accepts the information entered or the options
displayed.