User manual

Using the LCD Console

137

To verify that you have conﬁgured the UPS correctly:

1. Unplug the UPS unit from the wall socket to simulate a power

outage to the UPS.

2. The UPS takes over the power supply to the RaQ 3s. Each of the

RaQ 3 units monitoring the UPS displays on the LCD screen:

UPS:

ON BATTERY

3. Plug the UPS into the wall socket again. Each of the RaQ 3 units

monitoring the UPS displays on the LCD screen:

UPS:

POWER RESTORED

Rebooting

To reboot the RaQ 3 through the LCD console:

1. On the LCD console, hold down the button for approximately

2 seconds.

The LCD screen displays:

SELECT:

SETUP NETWORK

2. Press the button until Reboot appears in the LCD screen:

SELECT:

REBOOT

3. Press the button.

4. Use the arrow buttons to toggle the cursor between [Y] and [N].

Select [Y] to reboot the system.

5. Press the button.

You can also reboot the RaQ 3 through the Web browser:

1. On the Server Management screen, click Maintenance.

2. Click Reboot at the top of the screen.

A warning box appears, stating that rebooting the Cobalt server will

make it unavailable to the network for a few minutes.

3. In the table that appears, click Reboot.