User manual

iv
4. Power Cord
!
Caution: The power-supply cord is used as the main disconnect
device. Ensure that the socket outlet is located or installed near the
equipment and is easily accessible.
!
Attention: Le cordon d’alimentation sert d’interrupteur général. La
prise de courant doit être située or installée à proximité du matérial et
offrir un accès facile.
!
Achtung: Zur sicheren Trennung des Gerätes vom Netz ist der
Netzstecker zu ziehen. Vergewissern Sie sich, daß die Steckdose leicht
zugänglich ist.
5. Electrical Shock
To reduce the risk of electrical shock, do not disassemble this product. Take it to a qualified service
person when service or repair work is required. Opening or removing covers may expose you to
dangerous voltage or other risks. Incorrect reassembly can cause electric shock when this product is
subsequently used.
6. Operating the unit in an equipment rack
If you plan to install the Cobalt RaQ 3 in an equipment rack, take the following precautions:
(a) Ensure the ambient temperature around the Cobalt RaQ 3 (which may be higher than the room
temperature) is within the limits specified in Appendix B. See “Physical data” on page 141.
(b) Ensure there is sufficient air flow around the unit.
(c) Ensure electrical circuits are not overloaded; consider the nameplate ratings of all the connected
equipment and ensure you have overcurrent protection.
(d) Ensure the equipment is properly grounded, particularly any equipment connected to a power
strip.
(e) Do not place any objects on top of the Cobalt RaQ 3.
English
Français
Deutsch