User's Manual

Fusion User Manual
Version Q4 2013 www.cobantech.com Page 2 of 27
Introduction
The Coban Fusion mobile recorder is the front line of the Digital Video Management System (DVMS). The mobil
recorder allows users to record two channels of audio and two channels of video streams simultaneously to the
in-car CPU. This information is stored in the Mobile Hard Disk Drive until it can be transferred to the BOClient.
This manual addresses the steps needed to properly use the Mobile recording system.
Log In to the Fusion Mobile Recorder
1. After the mobile recording system has been
powered up, the Mobile Start Recorder
Software will initiate and display the Officer
Log-In screen.
Note:The officer ID should be automatically entered
into the appropriate field from information input
during MHDD checkout. If not, enter the appropriate
Officer ID.
2. Tap the Password button to display the
Virtual Keypad.
3. Type your password using the Virtual
Keypad then tap OK.
4. Tap Login.
5. The System Time and Date screen will
appear. Change the system time and date if
it is incorrect using the appropriate arrow
keys.
6. Take note of the estimated remaining
recording time.Storage remaining for video
recording is displayed above the OK button.
Note:A warning prompt will be displayed if available
recording time is under 4 hours.
7. Tap OK.
