User's Manual

Tray Mount
1. Set the CPU Mount onto the sliding tray and
mark the position for pilot holes.
2. Use a
5
/
16
” metal drill bit to drill the four
pilot holes in the sliding metal tray.
3. The four ( 4 ) ¼ -20 x ½” hex head bolts with
nylon threaded nuts slide into the grooves in
the railing of the CPU and secure it to the
CPU Mount.
4. Tighten the four ( 4 )¼ -20 x ½” hex head
bolts with nylon threaded nuts with a
crescent wrench and ensure that the CPU is
secured in place.